Brick Waterproofing: DIY vs. Professional Help

If you see stains spreading on the exterior walls of your brick house or notice dampness inside, you're probably thinking about brick waterproofing. But when you look into it, you'll find terms like water repellents, waterproof paint, water-based paint, and waterproofing paint all mixed together, making it confusing to know what to choose.
In this post, we'll start by figuring out if you actually need brick waterproofing, then we'll compare the differences between having it and not having it, and finally, we'll break down which approach—DIY or hiring a pro—is best for you. We've organized this so both homeowners and renters can make an informed decision.
First, Determine If You Really Need Brick Waterproofing
Bricks are porous materials, meaning they absorb moisture. When it rains, they soak up water through the surface and the mortar joints. Usually, this dries up quickly, but if your joints are cracked or the bricks themselves are old and holding a lot of water, it can lead to dampness inside, mold, efflorescence, or leaks on interior walls.
- The wall remains wet on one side even after the rain stops.
- White powder or persistent stains appear on the brick surface.
- There are many cracks or missing sections in the mortar joints.
- Stains or mold appear on interior walls or around window frames.
If none of these issues apply and your walls look generally fine, you might not need a major waterproofing project. On the flip side, if you see any of the symptoms above, your first step should be to figure out if the problem lies with the mortar, the bricks themselves, or the underlying structure.
What's the Difference With and Without Brick Waterproofing?
The results are quite different depending on whether you apply brick waterproofing or not. When you waterproof, it slows down how quickly water penetrates the brick, helping the wall stay drier inside. However, waterproofing isn't a magic fix. If you don't seal the entry points where water gets in, the effect will be minimal, so it's usually best to pair it with mortar joint repair.
| Category | Condition Before Waterproofing | Expected Benefit After Waterproofing |
|---|---|---|
| Exterior Wall Surface | Stains and efflorescence appear as rain soaks in. | Water absorption slows down, leading to fewer stains. |
| Mortar Joints | Water enters through cracked or missing gaps. | Entry significantly reduces after repair and waterproofing. |
| Interior Walls | Mold develops around corners and window frames. | Recurrence rates decrease after the source is blocked. |
Waterproofing Paint vs. Latex Paint: What's the Difference?
The materials you use on brick exterior walls depend entirely on what you're trying to achieve. Waterproofing paint is designed to create a barrier that stops water penetration, while latex paint is generally used for color and aesthetic finish.
Just slapping on latex paint won't give you waterproofing. In fact, if you layer it too thickly, it can trap moisture inside the wall, potentially causing the paint to peel off.
So, if your main goal is waterproofing, you should choose a dedicated waterproof paint or a coating with water-repellent properties. If you just want to change the look of your exterior, then a standard latex paint is what you need. If you plan to use both, you absolutely must check the manufacturer's guidelines regarding application order and whether you can apply multiple coats.
What You Need to Know If You're DIYing the Job
A do-it-yourself project is best suited for smaller areas or lower walls—things like the wall next to a flower bed or around your front door, where the job is relatively straightforward. Even in these smaller jobs, the most crucial step is thoroughly cleaning and drying the surface before you start. Any dust or mold left behind will prevent the coating from sticking properly.
- Clean the wall surface to remove all dirt and mold, and let it dry completely.
- Inspect the mortar joints and repair any areas that are cracked or broken.
- Apply the product thinly in multiple coats using a brush or roller, following the instructions on the product label.
- Don't try to apply a thick layer all at once; be sure to allow enough drying time between coats.
Self-application definitely has its limits. Working at heights presents safety hazards, and if the leak is coming from deep inside the wall, a surface coating alone won't fix the problem.
What to Check When Hiring a Professional Contractor
If you have a large area to cover, if the wall is two stories high or more, or if you suspect water is leaking all the way into your interior, it’s probably best to call in a professional. When choosing a contractor, make sure you ask about the following:
- Whether they will inspect the site first and explain the source of the problem.
- If the initial prep work, like cleaning and repairing the mortar joints, is included in the quote.
- If they can tell you exactly what materials they plan to use and in what order they will apply them.
- What the warranty covers and for how long if any issues arise after the job is done.
The final cost can vary widely based on the wall's surface area, height, the scope of necessary repairs, and the materials chosen. The smartest move is to get quotes from several different companies under the exact same conditions to compare.
Frequently Asked Questions About Brick Waterproofing
Can I actually notice a difference between having and not having brick waterproofing?
If you live in an area with a lot of rain or if your brick building absorbs moisture easily, you'll likely notice a pretty clear difference in reduced staining and indoor humidity. However, if the issue is actually with the mortar joints or cracks, waterproofing alone won't fix it, so it's best to check those areas too.
What is the typical sequence for brick waterproofing installation?
Generally, the process goes like this: cleaning and drying, repairing cracks and mortar joints, applying a primer or preparing the surface, applying the waterproofing material, and finally, finishing. Sticking to the required drying time for each step is what determines the final quality.
What should I do if stains reappear on the brick even after waterproofing?
This usually happens because the waterproofing material wasn't the right kind, or it was applied when the surface hadn't dried completely during installation. Try documenting exactly where the stains are coming back and check for other potential causes, like issues with the mortar joints or drainage structure.
If you're thinking about waterproofing your bricks, start by taking pictures of where any leaks are showing up. Also, check the condition of your mortar joints and where the wall is getting wet. Using those findings to figure out what you can tackle yourself versus what needs a professional can save you unnecessary costs and headaches.
