loading

How to Remove Rooftop Urethane: Step-by-Step Guide

Removing rooftop urethane coating

If your rooftop is lifting or cracking, and you're planning to re-waterproof it, you might be wondering how to remove the old urethane. If you don't properly remove the existing urethane, your new waterproofing material won't work correctly and could start lifting again after just a few months.

In this guide, we'll first cover the situations where you need to remove rooftop urethane, then compare the different removal methods, and finally lay out the steps you need to take before and after the job. Read this if you're trying to decide whether to DIY or hire a professional.

When You Need to Remove Rooftop Urethane

If your current urethane waterproofing layer is peeling or lifting, simply applying more material on top often won't solve the problem. If the base underneath the waterproofing is unstable, applying new materials on top will lead to poor adhesion.

  • The surface is bubbling or sinks in when you press on it.
  • There are multiple cracks, and you can see signs that water has seeped in.
  • The previous layer was applied too thickly, making it incompatible with a new waterproofing layer.
  • The roof has severe unevenness, preventing proper drainage.

In cases like these, you need to inspect the site to decide whether to scrape off just the damaged areas or remove everything. Whether you can finish with a partial repair depends on the extent of the peeling and the condition of the base.

Comparing Different Removal Methods

There are several ways to remove urethane, depending on the equipment and manpower you use. While mechanical equipment can save time on large areas, it also brings issues with cost, noise, and dust.

MethodCharacteristicsBest For
Manual ScraperSuitable for small areas; allows for fine control.Single-family home roofs, localized repairs.
Grinding EquipmentUniformly cleans large surface areas.Commercial roofs, schools, large expanses.
Mounted/Walk-Behind EquipmentFast working speed and requires fewer workers.Large areas with tight schedules.

If the area is small, manual labor might be enough. Conversely, if you have a large roof, you should consider using machinery so the construction timeline doesn't get excessively long.

Pre-Job Prep and Dust Control for Removal

Scraping off the urethane will create a lot of dust. It's a good idea to cover windows on the floors below, roof entry doors, and areas around outdoor units beforehand, and let nearby residents or tenants know about your work schedule. If you're in an apartment complex, going through the management office announcements is usually the way to go.

  1. Take photos documenting the scope of work and the final condition.
  2. Block off drains and scuppers so debris doesn't wash away.
  3. Check the weather and avoid working on days when rain is forecasted.
  4. Decide in advance how you plan to dispose of the leftover debris.

Preparing the Substrate After Removal

Once the urethane is gone, the concrete floor is usually rough and full of bumps. If you put new waterproofing on it right away, the adhesion will be poor, so you need to smooth out the floor and completely remove all dust and debris. This process is often called screeding the floor.

The surface must be dry; if there's any moisture left, the new materials could bubble up. Make sure to schedule plenty of drying time after the work is done.

What to Look For When Hiring a Rooftop Waterproofing Pro

When choosing a contractor, it's more important to see how specifically they detail the removal scope and the follow-up construction than just the price. A professional rooftop waterproofing company should be able to discuss what materials they will use for the reapplication after removal.

  • If they explain the removal scope and method based on actual site photos.
  • If they provide guidance on managing dust and noise.
  • If they specify the reapplication method and warranty after the substrate is prepped.
  • How much responsibility they take for waste disposal.

It's always safest to get quotes from several companies and compare the line items. The price will vary depending on the area, the existing thickness, whether they use specialized equipment, and the amount of debris generated.

Frequently Asked Questions About Roof Coating Removal

Can I just paint new urethane over the old urethane waterproofing?

In some cases, if the existing waterproofing layer is solid and not peeling, you might be able to apply a top coat. However, if you see any lifting or cracks, just painting over it is a temporary fix. If you don't prep the surface properly, it could peel right off again in no time.

Should I hire a company to handle both removal and reapplication?

If you hire a company to do both the removal and the new application, they can easily adjust the process based on the condition of the surface. If you hire separate contractors, it can get messy regarding who is responsible, so make sure to clearly define the scope of work before signing any contracts.

Can I start painting right after the removal process is done?

Right after removal, the surface is usually full of dust and might still be damp. If you paint over it immediately, the adhesion will be poor. You need to thoroughly clean and dry the surface before applying the material according to the manufacturer's instructions.

If you're unsure about the condition of your roof, take some photos first to document how much the urethane is lifting. Using those pictures when you talk to a professional will help you nail down the scope and method much faster.